Heavy Duty CV joints for Land Rover vehicles with a FIVE YEAR warranty against failure.
There has for some time been a need for a stronger CV joints especially with the recent trend of fitting 35″ tyres or similar, some people shrink a band around the existing CV bell, some fit the early type AEU 2522 to the later axles as this is the strongest one Land Rover can offer but these still fail.
Note the warranty runs from the original point of sale and not from the supply date of any replacement or repaired cv joints and does not include any consequential loss incurred that may be suffered in the event of a cv breakage.
We have manufactured the CV from scratch using improved materials, the inner and cage are from 300M and the bell is from 4340 alloy steel. There are a number of design changes which have been incorporated to produce a CV far exceeding the strength of anything else on the market. Please click for product technical data – housing & domemass.
These units have been subject to some very thorough testing in the UK and Europe and allow the driver to confidently use the front locker when on full steering lock even with the vehicle on it’s nose. We are also now able to offer late sytle CVs which are ABS compatible.
We have manufactured four designs of CV to cover most Land Rover applications. Please see our application guide below to see which CV joint is suitable for your vehicle.
Please note our five year warranty is only valid for vehicles with up to and including 35″ tyres.
| VEHICLE SPECIFICATION | CV JOINT | FRONT SHAFT | REAR SHAFT | DRIVE FLANGE (FRONT) | DRIVE FLANGE (REAR) | |
|---|---|---|---|---|---|---|
| DEFENDER 90 | ||||||
| – Up to Turbo Diesel – circa 1989 see note 1 | CVE | Front Shafts | Early Rear | 5806 | 5806 | |
| – 200 tdi see note 1 | To KA 930455 – see note 6 | CVE | Front Shafts | Early Rear | 5806 | 5806 |
| From LA 930456 | CVL | Front Shafts | Late Rear | 859 | 859 | |
| – 300 tdi | CVL/CVABS | Front Shafts | Late Rear | 859 | 859 | |
| -Td5/2.4 Tdci see note 5 | CVL/CVABS | Front Shafts | Late Rear | 859 | 859 | |
| DEFENDER 110 | ||||||
| – Up to Turbo Diesel – circa 1989 see note 1 | CVE | Front Shafts | Salisbury Early | 5806 | 5806 | |
| – 200 tdi see note 1 | To KA 930455 – see note 6 | CVE | Front Shafts | Salisbury Early | 5806 | 5806 |
| From LA 930456 | CVL | Front Shafts | Salisbury Late | 859 | 859 | |
| – 300 tdi see note 2 & 5 | CVL | Front Shafts | Salisbury Late | 859 | 859 | |
| – Td5 see note 5 | To 2A638164 (Salisbury axle) | CVL/CVABS | Front Shafts | Salisbury Late | 859 | 859 |
| From 2A638165 (Wolfe/P38 axle) | CVL/CVABS | Front Shafts | Late Rear | 859 | 859 | |
| – Puma see note 2 & 5 | CVL/CVABS | Front Shafts | Late Rear | 859 | 859 | |
| DISCOVERY I | ||||||
| – Without ABS (up to VIN JA032850) see note 1 & 3 | CVE | Front Shafts | Early Rear | 5806/M | 5806/M | |
| – Without ABS (from VIN JA032851) see note 1 & 2 | CVL | Front Shafts | Late Rear | 859 | 859 | |
| – With ABS see note 1 & 2 | CVABS | Front Shafts | Late Rear | 859 | 859 | |
| DISCOVERY II | ||||||
| Front kit includes CV joints/halfshafts/boots/clips | DISCO II FRONT KIT | DII REAR | Not applicable | Not applicable | ||
| RANGE ROVER CLASSIC | ||||||
| VIN CA – JA624755 Non ABS, see note 1 & 3 | CVE | Front Shafts | Early Rear | 5806/M | 5806/M | |
| VIN KA 624756 onwards, Non ABS, see note 1 | CVL | Front Shafts | Late Rear | 859 | 859 | |
| Vehicles with ABS – see note 7 | CVABS | Front Shafts | Late Rear | 859 | 859 | |
| RANGE ROVER P38 | Unable to supply | Unable to supply | Unable to supply | Unable to supply | Unable to supply | |
| Note 1 | If replacing standard stock 10 spline you will also require some form of 24 spline diff centre |
|---|---|
| Note 2 | Our CV joints can only be fitted with our or other 23 spline shafts. If your rear shafts have integral flanges it will be necessary for you to fit ours (or others) flanges. |
| Note 3 | To fit our CV joints you will need to purchase Modified Stub Axles (part no. Mod Stubs) & you will need our 5806/M to fit |
| Note 4 | The standard shafts shafts have intergral flanges and it will be necessary for you to fit our modified flanges |
| Note 5 | The CV joint ABS style can only be fitted with our range of shafts |
| Note 6 | If you have a 32 spline at the CV end of the shaft you will have to also fit our front shafts. |
| Note 7 | You will also require 2 x FTC5268 oil seal. |